SCHIZZO® Front Fork Components

SCHIZZO® FORK COVER SET WITH INTEGRATED TURN SIGNALS

 

Here is the perfect & cleanest solution for all those who don't know where to position the front turn signals:

 

SCHIZZO® Fork Cover Set with integrated turn-signals (E-approved), precision machined out of a solid piece of high grade aluminium. Fits "plug & play" every standard BMW R65/R80/R100 fork with the stock top-yoke and 36mm or 38,5mm fork tubes. Will also fit perfect with our SCHIZZO® Aluminum top-yokes.

 

Installed in just a few minutes, slides right over your fork tubes and then secured with a little screw. The wires of the turn signals runs internal the fork tubes for a super clean look.

 

The Fork Covers comes in a nice and resistent black anodized finish and gives your fork a clean and classic look. We recommend a set of our matching fork boots to complete the clean look of your front end.

 

Comes with different sets of O-Rings to spacer out possible tolerances on your front fork.

 

279,00 €

  • 2 kg
  • in stock
  • 1 - 3 days deliverytime1

SCHIZZO® FORK COVER SET

 

SCHIZZO® Fork Cover Set, precision machined out of a solid piece of high grade aluminium. Fits "plug & play" every standard BMW R65/R80/R100 fork with the stock top-yoke and 36mm or 38,5mm fork tubes. Will also fit perfect with our SCHIZZO® Aluminum top-yokes.

 

Installed in just a few minutes, slides right over your fork tubes and then secured with a little screw.

 

The Fork Covers comes in a nice and resistent black anodized finish and gives your fork a clean and classic look. We recommend a set of our matching fork boots to complete the clean look of your front end.

 

Comes with different sets of O-Rings to spacer out possible tolerances on your front fork.

 

159,00 €

  • 1,5 kg
  • in stock
  • 1 - 3 days deliverytime1

SCHIZZO® Fork Boots

 

Short Rubber Fork Boots, to fit all 36mm and 38,5mm BMW Front Fork Tubes. A perfect fit for all lowered Front Forks.

 

In combination with our SCHIZZO® Fork Covers you can "black-out" the complete Front Fork for that special SCHIZZO® Look!

 

Comes incl. black vinyl cable ties for easy installation.

 

69,00 €

  • 0,5 kg
  • in stock
  • 1 - 3 days deliverytime1

SCHIZZO® ALUMINUM TOP YOKE, Monolever 38,5 mm

 

CNC-machined SCHIZZO® Top Yoke, machined from a solid 20mm high-grade Aluminum as we use them on almost all our SCHIZZO® BMW's. Fit's bolt-on to all 38,5mm Fork Tubes on BMW R80/R100 Monolever and Twin-Shock models and replace the stock 4mm (!!!) steel Top Yoke.

 

These top-yokes are CNC-machined out of a solid block high-grade Aluminum and than black anodized to a super clean and super smooth finish and comes with a CNC-machined Steering Stem Nut and two CNC-Machined Fork Tube Nuts with new fork tube plugs. Hardware and new O-Rings are included as well.

 

You can configurate our SCHIZZO® Top Yokes to your specifications and your needs, as we offer many options:

 

- with matching riser/handle bar clamps for 22mm handle bars

- with matching riser/handle bar clamps for 28mm handle bars

 

SCHIZZO® Top Yoke Blanks and Speedometer Brackets are available separately.

 

Just choose your preferred set-up in the selection menue below.

 

399,00 €

  • 3 kg
  • in stock
  • 1 - 3 days deliverytime1

SCHIZZO® ALUMINUM TOP YOKE, Twin Shock 36,0 mm

 

CNC-machined SCHIZZO® Top Yoke, machined from a solid 20mm high-grade Aluminum as we use them on almost all our SCHIZZO® BMW's. Fit's bolt-on to all 36,0mm Fork Tubes on BMW R65/R80/R100 Monolever and Twin-Shock models and replace the stock 4mm (!!!) steel Top Yoke.

 

These top-yokes are CNC-machined out of a solid block high-grade Aluminum and than black anodized to a super clean and super smooth finish and comes with a CNC-machined Steering Stem Nut and two CNC-Machined Fork Tube Nuts with new fork tube plugs. Hardware and new O-Rings are included as well.

 

You can configurate our SCHIZZO® Top Yokes to your specifications and your needs, as we offer many options:

 

- with matching riser/handle bar clamps for 22mm handle bars

- with matching riser/handle bar clamps for 28mm handle bars

 

SCHIZZO® Top Yoke Blanks and Speedometer Brackets are available separately.

 

Just choose your preferred set-up in the selection menue below.

 

409,00 €

  • 3 kg
  • in stock
  • 1 - 3 days deliverytime1

SCHIZZO® Top Yoke Blanks

 

Our SCHIZZO® Top Yoke Blanks are made to cover the holes of the handle bar brackets when you want to use a clip-on handle bar. A must-have for every Cafe Racer build when using our SCHIZZO® Top Yokes.

 

Comes with stainless steel mounting hardware.

 

49,00 €

  • 1 kg
  • in stock
  • 1 - 3 days deliverytime1

SCHIZZO® / WalzWerk® Fork Legs Inlay, BMW Twin Shock R45, R65, R80 and R100

 

If you want to get rid of your ugly and old reflector on your BMW Twin Shock fork legs, we have a very nice solution, to fill the square space when you've removed the reflector: Our beautiful SCHIZZO® and WalzWerk® Fork Legs Inlay.

 

Laser-Cut from massive 4mm Aluminum, than brushed and black powdercoated to receive a very fine laser engraving.

 

Available in two versions (choose in the menue below):

1. WALZWERK

2. SCHIZZO

 

Sold as set of 2. Needs to be glued in.

 

Note: Glue not included (we recommend "SIKAFLEX" in black)

 

59,00 €

  • 0,5 kg
  • in stock
  • 7 - 10 days delivertime1

SCHIZZO® Steering Head Bearing Kit for BMW R45/R65/R80 and R100

 

High Quality Steering Head Bearings for all BMW Boxer Models as R45/R65/R80 and R100.

 

The kit also includes a set of high-quality waterproof seals to keep the bearings dry in all weather conditions.

 

49,90 €

  • 0,5 kg
  • in stock
  • 1 - 3 days deliverytime1

SCHIZZO® FORK LOWERING SERVICE (NO THREAD TYPE)

 

FOR FORK TUBES WITH NO THREAD ONLY (SEE PICTURE)!

 

Here we offer a special Fork Lowering Service for all BMW R65, R80 and R100 Monolever, Twin Shock and Paralever Models, to give your BMW the special SCHIZZO® Style:

 

You send us your standard Fork Tubes, and we profesionally shorten them to bring the front of your BMW down to give it the right stance. We offer several levels: -20mm, -40mm, -60mm, -80mm, -100mm and -120mm.

 

Just to give you an idea: The black bike on the picture has a 100mm lowered fork and the blue bike has a 120mm lowered fork.

 

We have a turnaround time of around 30 days for this service.

 

If you are not able to take apart your front fork by yourself, we also offer to do this for you! In that case, just send us your COMPLETE front fork and we'll do all the work for you. Please see our special front fork overhauling service further down.

 

NOTE: It's necessary to cut your stock fork springs the same amount as the fork tubes, which is possible but not perfect. For the perfect solution, we offer special progressive fork springs for a perfect function and a perfect handling!

 

Please send your Fork Tubes in a clean and oil-free condition!

 

Prices are for 1 Set = 2 fork tubes!

 

 

129,00 €

  • 4 kg
  • in stock
  • 7 - 10 days delivertime1

SCHIZZO® FORK LOWERING SERVICE ( THREAD TYPE)

 

FOR FORK TUBES WITH THREAD ONLY (SEE PICTURE)!

 

Here we offer a special Fork Lowering Service for all BMW R65, R80 and R100 Monolever, Twin Shock and Paralever Models, to give your BMW the special SCHIZZO® Style:

 

You send us your standard Fork Tubes, and we profesionally shorten them to bring the front of your BMW down to give it the right stance. We offer several levels: -20mm, -40mm, -60mm, -80mm, -100mm and -120mm.

 

Just to give you an idea: The black bike on the picture has a 100mm lowered fork and the blue bike has a 120mm lowered fork.

 

We have a turnaround time of around 30 days for this service.

 

If you are not able to take apart your front fork by yourself, we also offer to do this for you! In that case, just send us your COMPLETE front fork and we'll do all the work for you. Please see our special front fork overhauling service further down.

 

NOTE: It's necessary to cut your stock fork springs the same amount as the fork tubes, which is possible but not perfect. For the perfect solution, we offer special progressive fork springs for a perfect function and a perfect handling!

 

Please send your Fork Tubes in a clean and oil-free condition!

 

Prices are for 1 Set = 2 fork tubes!

 

 

159,00 €

  • 4 kg
  • in stock
  • 7 - 10 days delivertime1

SCHIZZO® FORK LEGS "SHAVED"

 

Here we offer a special "Shaving-Service" for your Fork Legs, to give your BMW the spezial SCHIZZO® Style:

 

Just send us your standard Fork Legs, and we profesionally machine them on our lathe. We take off the ugly cast bracket of the original fork stabilizer and smoothen both fork legs to a clean & perfect finish.

 

You want more? No problem: We also offer powder-coating for the Fork Legs after we machined them in our own in-house powder-coating department. You have the choice between black-matt or black-matt-structure!

 

If you are not able to take apart your front fork by yourself, we also offer to do this for you! In that case, just send us your COMPLETE front fork and we'll do all the work for you. Please see our special front fork overhauling service further down.

 

We have a turnaround time of around 30 days for this service.

 

Please send your Fork Legs in a clean and oil-free condition!

 

Prices are for 1 set = 2 Fork Legs!

 

229,00 €

  • 4 kg
  • in stock
  • 7 - 10 days delivertime1

SCHIZZO® PROGRESSIVE FORK SPRINGS, Monolever 38,5 mm Fork Tubes

 

The perfect addition to our Fork Lowering Service is this progressive For Spring Set, for all BMW Monolever and Twin Shock Fork Tubes with 38,5mm.

 

For a perfect setup, we offer the springs in the same lengths as the size of our shortened fork tubes: Stock length, -20mm, -40mm, -60mm, -80mm, -100mm and -120mm.

 

This Fork Spring Set includes 2 Fork Springs.

 

Available for 36mm and 38.5mm fork tubes. Please make a note at the checkout!

 

119,00 €

  • 3 kg
  • in stock
  • 1 - 3 days deliverytime1

SCHIZZO® PROGRESSIVE FORK SPRINGS, Twin Shock 36,0 mm Fork Tubes

 

The perfect addition to our Fork Lowering Service is this progressive For Spring Set, for all BMW Monolever and Twin Shock Fork Tubes with 36,0mm.

 

For a perfect setup, we offer the springs in the same lengths as the size of our shortened fork tubes: Stock length, -20mm, -40mm, -60mm, -80mm, -100mm and -120mm.

 

This Fork Spring Set includes 2 Fork Springs.

 

Available for 36mm and 38.5mm fork tubes. Please make a note at the checkout!

 

119,00 €

  • 3 kg
  • in stock
  • 1 - 3 days deliverytime1

COMPLETE FRONT FORK OVERHAULING & REBUILT

 

If you are not able to take apart and service your front fork by yourself, we offer this special front fork overhauling service.

 

Just send us your complete front end, and we profesionally take it apart, clean it, check all components and put the fork back together with new seals, bushings and fresh high-performance oil, ready to install!

 

Please allow us around 30 days for this service.

 

229,00 €

  • 8 kg
  • in stock
  • 7 - 10 days delivertime1